mukerjee.jpg

Dr. Manidipto Mukherjee

Ph.D

Research Assistant Professor

Educational Details:

  • Ph.D. in Welding Metallurgy and Joining Technology from Jadavpur University in 2016
  • M.Tech in Materials Engineering from Jadavpur University, 2011
  • B.Tech in Mechanical Engineering from West Bengal University of Technology in 2009

Academic Experience:

  • Research Assistant Professor, Department of Mechanical Engineering, Kattankulathur Campus, SRM University, Chennai, Tamilnadu, India, 2017-Till date.
  • Assistant Professor, Department of Mechanical Engineering, C.V. Raman College of Engineering, Bhubaneswar, Odisha, India, 2016-2017.

Other Professional Experience:

  • Delivered Guest Lecture at C.V. Raman College of Engineering, Marine Engineering, July 20, 2017.
  • Organized Faculty Development Programme in C.V. Raman College of Engineering, Bhubaneswar, May 01-06, 2017.
  • Senior Research Fellow, Jadavpur University, April, 2012 – March, 2016.
  • Research Scientist, Jadavpur University, August, 2011 – March, 2012.

Conferences/Seminars/Workshops Attended: 

  • National Workshop on “Advances in Joining Processes” organized by Jadavpur University, Kolkata and Technical Education Quality Improvement Programme (TEQIP-II), during September 22-23, 2016.
  • International Workshop on “Pipe Welding in Power, Oil and Gas Industries” organized by Welding Technology Centre (WTC), Metallurgical and Material Engineering Department, Jadavpur University and Technical Education Quality Improvement Programme (TEQIP-II) in association with IAWTR, during February 20-21, 2014.
  • Welding and Weldability of steels organized by the Indian Institute of Welding (IIW), Kolkata Branch for the Annual Seminar Weld-2013 at Indian Institute of Chemical Engineers, Dr. H.L. Roy Building, Jadavpur University.
  • International Workshop on “High Performance Steels” organised by Indian Institute of Engineering Science and Technology formerly known as Bengal Engineering & Science University (BESU), Shibpur, Howrah, West Bengal, during November 21-22, 2012.
  • Gas Metal Arc Welding of Ferrite Stainless Steel organized by the Indian Institute of Welding (IIW), Jamshedpur, January 2011.

Achievements and Awards: 

  • ESAB India Award for the best presented paper across all categories at the National Welding Seminar, 2016.
  • D & H Secheron Award for the best presented paper at the National Welding Seminar, 2015.
  • I .T. Mirchandani Memorial Research Award for the best research paper on Welding Metallurgy, Modelling and Extensive Testing presented at the International Congress-IIW, 2014.
  • Venus Wire Award for the best technical paper on Stainless Steel Application presented at the National Welding Seminar, 2013.
  • Fluid Flow Behaviour
  • Modes of Metal Transfer
  • Microstructural and Mechanical Characterization of Metals and Alloys
  • Welding and Joining
  • Statistical Methodologies
  • High Cycle Fatigue and Fracture
  • Corrosion Behaviour of Metals and Alloys
  • Material Processing and Alloy Design
  • Manidipto Mukherjee and Tapan Kumar Pal: “Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded joints”, Materials Characterization, 2017, 131, 406–424.
  • Nikhil Kumar, Manidipto Mukherjee and Asish Bandyopadhyay: “Study on Laser Welding of Austenitic Stainless Steel by Varying Incident Angle of Pulsed Laser Beam”, Optics and Laser Technology, 2017, 94, 296–309.
  • Nikhil Kumar, Manidipto Mukherjee and Asish Bandyopadhyay: “Comparative Study of Pulsed Nd:YAG Laser Welding of AISI 304 and AISI 316 Stainless Steels”, Optics and Laser Technology, 2017, 88, 24-39.
  • Manidipto Mukherjee, Saptarshi Saha, Tapan Kumar Pal and Prasanta Kanjilal: “Influence of Modes of Metal Transfer on Grain Structure and Direction of Grain Growth in Low Nickel Austenitic Stainless Steel Weld Metals”, Materials Characterization, 2015, 102, 9-18.
  • Saptarshi Saha, Manidipto Mukherjee, and Tapan Kumar Pal: “Microstructure, Texture and Mechanical Property Analysis of Gas Metal Arc Welded AISI 304 Austenitic Stainless Steel”, Journal of Materials Engineering and Performance, 2015, 24(3), 1125-1139.
  • Shilajit Das, Manidipto Mukherjee and Tapan Kumar Pal: “Effect of Grain Boundary Precipitation and δ-ferrite formation on Surface Defect of Low Nickel Austenitic Stainless Steels”, Engineering Failure Analysis, 2015, 54(4), 90-102.
  • Mainak Sen, Manidipto Mukherjee and Tapan Kumar Pal: “Evaluation of Correlations between DP-GMAW Process Parameters and Bead Geometry”, Welding Journal, 2015, 94(8), 265s-279s.
  • Deb Kumar Adak, Manidipto Mukherjee, Tapan Kumar Pal: “Development of a Direct Correlation of Bead Geometry, Grain Size and HAZ Width with the GMAW Process Parameters on Bead-on-plate Welds of Mild Steel”, Transaction of Indian Institute of Metals, 2015, 68(5), 839-849.
  • M. Mukehrjee, A. Dutta, T.K. Pal, P. Kanjilal and S. Sisodia: “Enhancement of Microstructural and Mechanical Properties by Pulse Mode of Metal Transfer in Welded Modified Ferritic Stainless Steel”, ISIJ International, 2015, 55(7), 1439-1447.
  • M. Mukherjee, J. Saha, P. Kanjilal, T.K. Pal and S. Sisodia: “Influence of Gas Mixtures in GMAW of Modified 409M Ferritic Stainless Steel”, Welding Journal, 2015, 94(4), 101s-114s.
  • Subhrajit Debnath, Manidipto Mukherjee and Tapan Kumar Pal: “Study on Microstructure and Mechanical Properties of Thick Low-Alloy Quench and Tempered Steel Welded Joint”, Materials Performance and Characterization, 2014, 3(1), 23-48.
  • Manidipto Mukherjee and Tapan Kumar Pal: “Effect of Modes of Metal Transfer and Microstructure on Corrosion Behaviour of Welded Modified Ferritic Stainless Steel in Acidic Environments”, Journal of Applied Electrochemistry, 2013, 43, 347–365.
  • Manidipto Mukherjee and Tapan Kumar Pal:  “Role of Microstructural Constituents on Surface Crack Formation during Hot Rolling of Standard and Low Nickel Austenitic Stainless Steels”, Acta Metall. Sin. (Engl. Lett.), 2013, 26(2), 206-216.
  • Manidipto Mukherjee and Tapan Kumar Pal: “Influence of Mode of Metal Transfer on Microstructure and Mechanical Properties of Gas Metal Arc Welded Modified Ferritic Stainless Steel”, Metallurgical and Materials Transactions A, 2012, 43A, 1791-1808.
  • M. Mukherjee and T. K. Pal: “Influence of Heat Input on Martensite Formation and Impact Property of Ferritic-Austenitic Dissimilar Weld Metals”, Journal of Material Science and Technology, 2012, 28(4), 343–352. 

Papers Presented:

  • Manabhanjan Sahoo and Manidipto Mukherjee: “Optimization of Process Parameters In GMAW of Low Carbon Steel to Predict Maximum Yield Strength Using Full Factorial Design ", National Welding Meet (NWM), organized by IIW-Begaluru, at NCC, Bengaluru, India, May 12-13, 2017.
  • Manidipto Mukherjee, Manabhanjan Sahoo and Debasis Mahapatra: "Correlation of Bead Geometry, Grain Size and Hardness with the Pulse TIG Process Parameters of Fe16Cr0.3Ni9Mn0.17N Austenitic Stainless Steel Weld Deposits by Statistical Analysis", National Welding Meet (NWM), organized by IIW-Begaluru, at NCC, Bengaluru, India, May 12-13, 2017.
  • Manidipto Mukherjee, Saptarshi Saha and Tapan Kumar Pal: “Evaluation of correlation between process parameter, bead geometry & microstructure of Fe16Cr0.3Ni9Mn0.17N austenitic stainless steel weld deposits by statistical analysis”, National Welding Seminar (NWS), organized by IIW-Kolkata, at Science city, Kolkata, India, December 15-17, 2016.
  • Manidipto Mukherjee, Saptarshi Saha and Tapan Kumar Pal: “Influence of Heat Input on Microstructural and Mechanical Behaviour of Pulsed Gas Metal Arc Welded Fe16Cr0.3Ni9Mn0.17N ASS”, National Welding Seminar (NWS), organized by IIW-Kolkata, at Science city, Kolkata, India, December 15-17, 2016.
  • Manidipto Mukherjee, Saptarshi Saha, Tapan Kumar Pal, Prasanta Kanjilal, and Sunil Sisodia: “Microstructural and Mechanical Behaviour of Fe16Cr1Ni9Mn0.12N austenitic stainless steel welded joints”, National Welding Seminar (NWS), organized by IIW-Mumbai, at Mumbai, India, December 10-12, 2015.
  • Manidipto Mukherjee, Saptarshi Saha, Tapan Kumar Pal, Prasanta Kanjilal, and Sunil Sisodia: “EBSD Study of Gas Metal Arc Welded Low Nickel Austenitic Stainless Steel”, National Welding Seminar (NWS), organized by IIW-Jamshedpur and Tata Steel, at Jamshedpur, India, January 22-24, 2015.
  • Manidipto Mukherjee, Anupama Dutta, Tapan Kumar Pal, Prasanta Kanjilal, and Sunil Sisodia: “Effect of Pulse Mode of Metal Transfer on Microstructural and Mechanical Properties of Welded Modified Ferritic Stainless Steel”, National Welding Seminar (NWS), organized by IIW-Jamshedpur and Tata Steel, at Jamshedpur, India, January 22-24, 2015.
  • Deb Kumar Adak, Manidipto Mukherjee and Tapan Kumar Pal: “Effect of GMAW Process Parameters on Bead-on-plate Weld Characteristics using Multiple Linear Regression Analysis”, 2nd International Conf. on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015), Organized by College of Engineering & Management, Kolaghat, West Bengal, India, January 2-4, 2015.
  • Mainak Sen, Manidipto Mukherjee and Tapan Kumar Pal: "Prediction of Weld Bead Geometry for Double Pulse Gas Metal Arc Welding Process By Regression Analysis", Proceedings of  5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR 2014 hosted by IIT Guwahati, Guwahati, India, December 12-14, 2014.
  • Manidipto Mukherjee, Joydeep Saha, Tapan Kumar Pal, Prasanta Kanjilal, and Sunil Sisodia: "Influence of Shielding Gas Mixtures on Microstructural and Mechanical Properties of Gas Metal Arc Welded Modified Ferritic Stainless Steel", NMD ATM 2014, organized by College of Engineering, Pune, India, November 12-15, 2014.
  • M. Sen, M. Mukherjee and T. K. Pal: "Investigation for Controlled Double Pulse GMAW Through Response Surface Methodology Based Approach" International Conf. on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Organized by Punjab Technical University, Punjab, October 16-18, 2014.
  • M. Mukherjee, J. Saha, P. Kanjilal, T.K. Pal and S. Sisodia: "Influence of Shielding Gas Mixtures on Microstructural and Mechanical Properties of Ferritic-Austenitic Dissimilar Weld Joints", Proceedings of IIW International Congress 2014 on Advancement In Welding, Cutting and Surfacing Technologies for Improved Economy and Sustainable Environment hosted by IIW, New Delhi, India, April 9-11, 2014.
  • Mainak Sen, Manidipto Mukherjee and Tapan Kumar Pal: "Evaluation and Optimization of Double Pulsed Gas Metal Arc Welding Process Parameters for the Prediction of Weld Bead Geometry using Statistical Methods", Proceedings of IIW International Congress 2014 on Advancement In Welding, Cutting And Surfacing Technologies For Improved Economy And Sustainable Environment hosted by IIW, New Delhi, India, April 9-11, 2014.
  • Manidipto Mukherjee and Tapan Kumar Pal: “Development of Suitable Gas Metal Arc Welding Procedure for Modified Ferritic Stainless Steel”, presented in the Seminar on Processing, Microstructure and Properties of Steel organized by TEQIP-II and Metallurgical and Material Engineering Department, Jadavpur University, Kolkata, March 25, 2014.
  • M. Sen, M. Mukherjee and T. K. Pal, "Optimization of Weld Bead Geometry in Double Pulsed Gas Metal Arc Welding using Statistical Methods" International Conf. on Advancements and Futuristic Trends in Mechanical and Materials Engineering, Organized by Punjab Technical University, Punjab, October 3-6, 2013.
  • M. Mukherjee, P. Kanjilal and T.K. Pal, “Grain Boundary and Pitting Corrosion Behaviour of Modified Ferritic Stainless steel Weld metals in Acidic Environments”, National Welding Seminar (NWS), in Bangalore, India, February 7-9, 2013.
  • M. Mukherjee, P. Kanjilal and T.K. Pal, “Corrosion Behaviour of Ferritic-Austenitic Dissimilar Weld metals in Acidic Environments: Effect of Microstructural Constituents”, Proceedings of 5th International Symposium for Research Scholars on Metallurgy, Materials Science & Engineering, Organised by IIT Madras, Chennai, India, December 13-15, 2012.
  • Manidipto Mukherjee and Tapan Kumar Pal, “Gas Metal Arc Welding of Modified Ferritic Stainless Steel”, Proceedings of 64th International Conference of the International Institute of Welding on Global Trends in Joining, Cutting and Surfacing Technology, Chennai, July 17-22, 2011.
  • Manidipto Mukherjee, Sunil Sisodia and Tapan Kumar Pal, “Evaluation of microstructure and properties of Gas-Metal Arc welded Ferritic Stainless Steel under different mode of metal transfer”, National Welding Seminar (NWS), Visakhapatnam, December 2010.

Working Papers: 

  • Tapan Sarkar, Manidipto Mukherjee, Tapan Kumar Pal: “Effect of Cu addition on Microstructure and Hardness of As-Cast and Heat Treated High-Cr Cast Iron”, under review at Transactions of the Indian Institute of Metals.

Work in Progress:

  •  M. Sen and M. Mukherjee, "Effect of Double Pulsed Gas Metal Arc Welding Process Parameters on Welded Joint Characteristics", 2017.
  • Nikhil Kumar, Manidipto Mukherjee and Asish Bandyopadhyay: “Influence of Pulsed Nd-YAG Laser Incident Angle on ASS Welded Joint”, 2017.
  • M. Mukherjee, V. K. Pal and S.K. Singh, “Development of Friction Stir Processed Aluminium Alloys”, 2017.
     
  • Basic Mechanical Engineering
  • Basic Manufacturing Processes
  • Material Science
  • Welding Technology
  • Non Conventional Energy Sources